 |
| Quantity: | |
|---|---|
Brief Introduction
Made from polyamide film composites.
Advanced film technology and manufacturing processes ensure high quality and performance.
The elements are shipped dry for easier handling and have an unlimited shelf life.
Each element is 100% vacuum integrity tested.
Application
Drinking water.
Softened water for homes, hotels, commercial laundries and car wash.
Spot free rinse, reverse osmosis window cleaning and solar panel cleaning
Pure water for pharmaceuticals, laboratories, Hemodialysis and electronics
Sterilisers and autoclaves.
Chemical industry.
Aquarium water treatment.
Boiler and cooling towers make-up water.
pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production.
Extreme Operation Conditions
Max. Working Pressure: 600psi(4. 14Mpa)
Max. Feedwater Flow: 75gpm(17 m3/h) (8040)
16gpm (3.6 m3/h) (4040)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Residual chlorine Concentration of Feedwater: < 0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 15psi(0.1Mpa)
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
Brief Introduction
Made from polyamide film composites.
Advanced film technology and manufacturing processes ensure high quality and performance.
The elements are shipped dry for easier handling and have an unlimited shelf life.
Each element is 100% vacuum integrity tested.
Application
Drinking water.
Softened water for homes, hotels, commercial laundries and car wash.
Spot free rinse, reverse osmosis window cleaning and solar panel cleaning
Pure water for pharmaceuticals, laboratories, Hemodialysis and electronics
Sterilisers and autoclaves.
Chemical industry.
Aquarium water treatment.
Boiler and cooling towers make-up water.
pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production.
Extreme Operation Conditions
Max. Working Pressure: 600psi(4. 14Mpa)
Max. Feedwater Flow: 75gpm(17 m3/h) (8040)
16gpm (3.6 m3/h) (4040)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Residual chlorine Concentration of Feedwater: < 0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 15psi(0.1Mpa)
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
