Factory Industrial Ro Reverse Osmosis Membrane Price with High Tds Brief Introduction
Made from polyamide film composites.
Advanced film technology and manufacturing processes ensure high quality and performance.
The elements are shipped dry for easier handling and have an unlimited shelf life.
Each element is 100% vacuum integrity tested.
Specifications and Major Properties
Testing Conditions:
Testing Pressure: 150 psi (1.03Mpa)
Temperature of Testing Solution: 25°C
Concentration of Testing Solution (NaCl): 1500ppm
pH Value of Testing Solution: 7.5
Recovery Rate of Single Membrane Element: 15%
Extreme Operation Conditions
Max. Working Pressure: 600psi(4. 14Mpa)
Max. Feedwater Flow: 75gpm(17 m3/h) (8040)
16gpm (3.6 m3/h) (4040)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Residual chlorine Concentration of Feedwater: < 0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 15psi(0.1Mpa)
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
Factory Industrial Ro Reverse Osmosis Membrane Price with High Tds Brief Introduction
Made from polyamide film composites.
Advanced film technology and manufacturing processes ensure high quality and performance.
The elements are shipped dry for easier handling and have an unlimited shelf life.
Each element is 100% vacuum integrity tested.
Specifications and Major Properties
Testing Conditions:
Testing Pressure: 150 psi (1.03Mpa)
Temperature of Testing Solution: 25°C
Concentration of Testing Solution (NaCl): 1500ppm
pH Value of Testing Solution: 7.5
Recovery Rate of Single Membrane Element: 15%
Extreme Operation Conditions
Max. Working Pressure: 600psi(4. 14Mpa)
Max. Feedwater Flow: 75gpm(17 m3/h) (8040)
16gpm (3.6 m3/h) (4040)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Residual chlorine Concentration of Feedwater: < 0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 15psi(0.1Mpa)
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
As the global water resource crisis continues to intensify, the development of water treatment, wastewater treatment, and environmental protection technologies has become increasingly crucial. Against this backdrop, the 2023 Russia International Water Treatment Exhibition (ECWATECH) has emerged as a
The application of reverse osmosis (RO) technology in steam generation processes has gained significant attention due to its potential to enhance operational efficiency, reduce scaling, and improve water quality. This paper delves into the utilization of small-scale RO systems in steam generators. B
Reverse osmosis (RO) systems are commonly used for residential water purification, producing clean and fresh drinking water. Over time, RO membranes can become fouled or clogged by impurities, affecting water quality and system efficiency. This paper provides a comprehensive guide on how to clean a