Availability: | |
---|---|
Quantity: | |
Brief Introduction
The performance of the 8040 RO membrane sets it apart from conventional filtration systems.With its large surface area, it allows for efficient water treatment by maximizing contact with the membrane, resulting in higher filtration rates and superior performance compared to other filtration methods. And consistently delivers exceptional water quality, making it suitable for a wide range of applications, including drinking water, food and beverage production, desalination,pharmaceutical manufacturing, and various other commercial and industrial processes.
Specifications and Major Properties
Model | Average Permeated Flow GPD (m3/d) | Stable Rejection Rate (%) | Minimum Rejection Rate (%) |
UMK21-8040 | 11500(45.7) | 99.0 | 98.5 |
UMK22-8040 | 10500(39.7) | 99.5 | 99.0 |
UMK11-4040 | 2600(9.1) | 99.0 | 98.5 |
UMK-HR-4040 | 2000(7.6) | 99.6 | 99.3 |
Testing Conditions:
Testing Pressure: 150 psi (1.03Mpa)
Temperature of Testing Solution: 25°C
Concentration of Testing Solution (NaCl): 1500ppm
pH Value of Testing Solution: 7.5
Recovery Rate of Single Membrane Element: 15%
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
Brief Introduction
The performance of the 8040 RO membrane sets it apart from conventional filtration systems.With its large surface area, it allows for efficient water treatment by maximizing contact with the membrane, resulting in higher filtration rates and superior performance compared to other filtration methods. And consistently delivers exceptional water quality, making it suitable for a wide range of applications, including drinking water, food and beverage production, desalination,pharmaceutical manufacturing, and various other commercial and industrial processes.
Specifications and Major Properties
Model | Average Permeated Flow GPD (m3/d) | Stable Rejection Rate (%) | Minimum Rejection Rate (%) |
UMK21-8040 | 11500(45.7) | 99.0 | 98.5 |
UMK22-8040 | 10500(39.7) | 99.5 | 99.0 |
UMK11-4040 | 2600(9.1) | 99.0 | 98.5 |
UMK-HR-4040 | 2000(7.6) | 99.6 | 99.3 |
Testing Conditions:
Testing Pressure: 150 psi (1.03Mpa)
Temperature of Testing Solution: 25°C
Concentration of Testing Solution (NaCl): 1500ppm
pH Value of Testing Solution: 7.5
Recovery Rate of Single Membrane Element: 15%
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
On June 6, 2025, the 17th Watertech China successfully wrapped up its three-day event at the National Exhibition and Convention Center (Hongqiao) in Shanghai. As one of the world’s leading trade shows for the water treatment industry, it brought together cutting-edge technologies and innovative prod
1. Water Quality in CanadaIn Canada's Shield area, water is relatively soft because hard rocks do not release much calcium into the water. However, in regions with more limestone than granite, large amounts of calcium dissolve into the water, making it hard. The water hardness in these areas usually
The 2025 WQA Convention & Exposition was held from April 22 to 24 at the Long Beach Convention Center in California, USA. The exhibition area covered more than 25,000 square meters. As an authoritative annual event in the North American water treatment industry, it attracted over 400 exhibitors and