Availability: | |
---|---|
Quantity: | |
Brief Introduction
UMEK 40 inch RO Membrane is available in two different diameter sizes, providing you with flexibility to choose the option that best suits your specific system requirements. The 2.5" diameter size is suitable for smaller-scale applications, while the 4" diameter size is ideal for larger commercial setups.
Specifications and Major Properties
Model | Average Permeated Flow GPD (m3/d) | Stable Rejection Rate (%) | Minimum Rejection Rate (%) |
UMK21-8040 | 11500(45.7) | 99.0 | 98.5 |
UMK22-8040 | 10500(39.7) | 99.5 | 99.0 |
UMK11-4040 | 2600(9.1) | 99.0 | 98.5 |
UMK-HR-4040 | 2000(7.6) | 99.6 | 99.3 |
Testing Conditions:
Testing Pressure: 150 psi (1.03Mpa)
Temperature of Testing Solution: 25°C
Concentration of Testing Solution (NaCl): 1500ppm
pH Value of Testing Solution: 7.5
Recovery Rate of Single Membrane Element: 15%
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
UMEK understands that every water treatment system is unique, so we offer custom size options for our 40 inch RO membranes. This allows you to tailor the membrane to perfectly fit your specific system configuration, ensuring optimum efficiency and performance.
RO Membrane produced by UMEK meets rigorous industry standards and undergoes thorough quality testing to ensure consistent performance and reliability. It is manufactured in state-of-the-art facilities using premium materials and adheres to strict quality control procedures. Rest assured that we will not let you down.
Brief Introduction
UMEK 40 inch RO Membrane is available in two different diameter sizes, providing you with flexibility to choose the option that best suits your specific system requirements. The 2.5" diameter size is suitable for smaller-scale applications, while the 4" diameter size is ideal for larger commercial setups.
Specifications and Major Properties
Model | Average Permeated Flow GPD (m3/d) | Stable Rejection Rate (%) | Minimum Rejection Rate (%) |
UMK21-8040 | 11500(45.7) | 99.0 | 98.5 |
UMK22-8040 | 10500(39.7) | 99.5 | 99.0 |
UMK11-4040 | 2600(9.1) | 99.0 | 98.5 |
UMK-HR-4040 | 2000(7.6) | 99.6 | 99.3 |
Testing Conditions:
Testing Pressure: 150 psi (1.03Mpa)
Temperature of Testing Solution: 25°C
Concentration of Testing Solution (NaCl): 1500ppm
pH Value of Testing Solution: 7.5
Recovery Rate of Single Membrane Element: 15%
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
UMEK understands that every water treatment system is unique, so we offer custom size options for our 40 inch RO membranes. This allows you to tailor the membrane to perfectly fit your specific system configuration, ensuring optimum efficiency and performance.
RO Membrane produced by UMEK meets rigorous industry standards and undergoes thorough quality testing to ensure consistent performance and reliability. It is manufactured in state-of-the-art facilities using premium materials and adheres to strict quality control procedures. Rest assured that we will not let you down.
On June 6, 2025, the 17th Watertech China successfully wrapped up its three-day event at the National Exhibition and Convention Center (Hongqiao) in Shanghai. As one of the world’s leading trade shows for the water treatment industry, it brought together cutting-edge technologies and innovative prod
1. Water Quality in CanadaIn Canada's Shield area, water is relatively soft because hard rocks do not release much calcium into the water. However, in regions with more limestone than granite, large amounts of calcium dissolve into the water, making it hard. The water hardness in these areas usually
The 2025 WQA Convention & Exposition was held from April 22 to 24 at the Long Beach Convention Center in California, USA. The exhibition area covered more than 25,000 square meters. As an authoritative annual event in the North American water treatment industry, it attracted over 400 exhibitors and